Some interesting facts about IP addresses and their binary conversions.


This article is all about IP addresses and binary conversion of IP addresses. In this article, we discuss one of the most fundamental concepts of information technology, IP addresses! we all know that our all technical devices like computer, laptop, Smartphone etc. are have some kind of addresses. These addresses are generally called as IP Address or MAC Address. we all know that there is two type of addresses are present for computers and smartphones one is logical address and one is the physical address.

In other words, the logical address is generally called as IP address and the physical address is called as MAC address. people also know these addresses by IP and MAC address they don’t know about the logical and physical address. So, in this post, we talk about types of addresses, use of addresses in our daily life.

types of sddress

1. Physical address (MAC address): – A media access control address (MAC address) of a computer is a unique identifier assigned to network interfaces for communications at the data link layer of a network segment. MAC address is used for IEEE 802 network technologies, including Ethernet and WiFi. logically it is used in the media access control in OSI reference model. MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware. It assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number. Mac address also is known as Ethernet hardware address (EHA), hardware address and physical address. In other words, this is called as 48-bit address because it contains 6-octet in their address and each single octet contains 8 bits. This 48-bit address space contains potentially 248 or 281,474,976,710,656 possible MAC addresses. To check your computers MAC address open command prompt then type getmac command in it and press enter.

structure of mac address

2. Logical address (IP address): – An IP address (Internet Protocol address) is a numerical level which assigned to each device like a computer, printer, and smartphone etc. participating in a computer network that uses the internet protocol for communication. An IP address is based on two principle functions  1. host or network interface identification and 2. location addressing. Its role has been characterized as follows: “A route indicates how to get there and A name indicates what we seek as well as An IP address indicates where it is. it means IP address indicates the location of a user.

Generally, IP address is of two types: –    IPv6 and  IPv4

Internet protocol version 4 (IPv4) contain 32-bits in its address, is still in use today. But we saw that the internet users will be increases day by day in this world and the available address decreases. In that case, the designer of Internet protocol also defined a new IP address as 128 bit and this system is known as Internet protocol version 6 (IPv6). To check IP address of your computer simply open command prompt then type ipconfig command in it and press enter.

Ip addresses are usually written in human-readable notation, such as 10.0.0.0 (IPv4), and  2001:db8:0:1234:0:567:8:1 (IPv6)

 An example of IPv4 in dotted-decimal notation,     IP address = 172.16.254.1

dotted decimal notation

An example of IPv6 in hexadecimal notation,     MAC address = 2001:db8:0:1234:0:567:8:1

Mac address notation in hexadecimal form

After it now we learn only about IPv4 because this version will be used in the present world and IPv6 is the reserve for future use so let’s start here learn about IPv4.

IP version for is contained 32 bit in its address. IPv4 has 4 octets in their IP address and each octet has 8 bits only. Now we proved you that IP version has 32 bits in their IP address Let’s saw

4 octet × 8 bit (each octet have 8 bit) = 32 bit

Now we discuss classes of IPv4. We all know that IPv4 is divided into 5 classes and class have a specific subnet mask and a fixed number of IPs will be considered in a specific class.

Classes of IPv4 is classified below with their specific subnets in it

1.  class A   (0-126)    example 10.22.20   subnet mask for A class is  255.0.0.0

2.  class B   (127-191) example 172.168.3.0  subnet mask for B class is  255.255.0.0

3.  class C (192-223) example 192.168.0.1  subnet mask for C class is  255.255.255.0

4.  class D (224-239) these IPs are used for multicasting area

5.  class E (240- 255)  these IPs are reserved for research area

There are we only use Class A, B, and C IPs for our personal and commercial work and Class D and E IPs are not used by us these IPs are used by researchers and they research on these IPs and search much more other things about Internet protocol addresses and also search for more series of IP addresses.

Now we discuss reserve IP addresses. We also know that an IP address will also be displayed on your computer if it is not connected to the internet. It is same for all computers, laptop etc. If you connected to a network your computers IP address will be assigned according to your provider’s IP address and when you not connected to the internet then also an IP address shown on your screen is 127.0.0.1 this is same for all computers in this world. These types of IPs will be known as reserved IPs.

Reserved IPs are be used for assign loopback IP of your computer. There are two reserved IPs are present in this world. That are given below

1.  first reserve IP address =  0.0.0.0

2. second reserved IP is not a specific IP. all IPs which are come in this series will be reserved = 127.0.0.1 ( full series of 127 will be reserved for loopback IPs

Now we learn dotted-decimal notation of an IP address which belongs to IPv4. So let’s start with an example

First of all, we will describe a single octet by dividing it into 8 bits and how we use it for binary conversion of an Ip address.

discription of 1 octet

Now we take an example from class C    192.168.1.2

we all know that IPv4 has 4 octets and each octet has 8 bit in it.

4 × 1 octet  =  4 × 8 bit  =  32 bit

Now we make a table and convert your IP address into binary conversion

IP address 1st bit 2nd bit 3rd bit 4th bit 5th bit 6th bit 7th bit 8th bit
128 64 32 16 8 4 2 1
192 1 1 0 0 0 0 0 0
168 1 0 1 0 1 0 0 0
1 0 0 0 0 0 0 0 1
2 0 0 0 0 0 0 1 0

Now we asw that binary conversion of an IP address 192.168.1.2 so now we write this IP address into dotted-decimal notation by this method like we use

192             .168             .1                    .2

⇓                   ⇓                   ⇓                    ⇓

11000000.10101000.00000001.00000010

              THAT’S IT 

If you have any queries about this contact me or comment below. If you want to saw more examples of class A and B IPs then read my next article.

9 thoughts on “Some interesting facts about IP addresses and their binary conversions.

  1. You ought to be a part of a contest for one of
    the best websites on the net. I most certainly will highly recommend this web site!

    Like

  2. whoah this weblog is fantastic i love reading your articles.
    Keep up the great work! You know, many individuals are looking round for this info,
    you could help them greatly.

    Like

  3. you’re truly a just right webmaster. The web site loading velocity is incredible.
    It kind of feels that you are doing any unique trick.
    In addition, The contents are masterwork. you’ve done a wonderful process in this
    subject!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s